Tip

June 15, 2017

Wireless Remote Control Switch AC 220V

Tags: , , , , ,

Wireless Remote Control Switch AC 220V

  • Working Voltage: AC220V (Input AC220V Output AC220V)
  • Max Current: 10A (have better lower than 7A )
  • Channel: 1CH
  • Working Frequency : 315MHZ/433.92MHZ (Optional, specify in message during purchase)
  • Receiver sensitivity: : -105Db
  • Working temperature : -10 °C – +60 °C
  • Output way : Momentary / Toggle / Latched Adjustable

Add Controller by the Learning Button on the receiver

Output State (Momentary, Toggle, Latched) adjusted freely by soldering with different dot .

A: Momentary———–No connection is Momentary.
B: Toggle————Connect “T& Mid Dot “is Toggle.
C: Latched————- Connect “L& Mid Dot” is Latched.

Momentary————Press the Transmitter button, the receiver relay is ON, release button; the receiver relay is OFF,

Toggle—————Press transmitter button for 1 time, the receiver relay is ON, press button again, the receiver relay is OFF,
Latched————Press transmitter button A, the receiver relay is ON, Press the transmitter button B, the relay is OFF.

Learning Method

Input AC220V for the Receiver. Keeping press the learning button, the LED indicator flash fast then press the transmitter button, until the LED indicator stop to flash fast, it means successfully learned.

Clearing Code

Keeping press the Learning Button on the receiver until the LED indicator flash fast until it flash slow for 2 times. It means the code have been cleared successfully.

banner